LED Car Logo Light, Scanning 12V Rear Emblem

About this item

The Solis Halo Scanning Logo Light is an illuminated replacement car emblem with a dynamic scanning mode in white light. It is waterproof and dustproof, mounts with strong double-sided automotive adhesive, and wires into your 12V system so it lights with your small night lamps.

Illuminated emblem look — A glowing white logo gives the rear of your car a clean factory-lit finish. The dynamic scanning mode adds a moving sweep of light.
Built for the outdoors — The LED lamp is waterproof and dustproof, and backed with strong double-sided adhesive for a firm hold.
Wires to your night lamps — Connect the logo light to the taillight supply so it switches on together with the small night lamps. Tools needed: flat and cross screwdrivers, pliers, electrical tape and a towel.
Light mode — Dynamic scanning, white light
Power — 12V DC vehicle supply
Protection — Waterproof and dustproof

Specifications

Light mode	Dynamic scanning, white light
Power	12V DC vehicle supply
Protection	Waterproof and dustproof
Mounting	Double-sided automotive adhesive on the back
Wiring	Red to positive, black to negative
Tools needed	Flat screwdriver, cross screwdriver, pliers, electrical tape, towel
Fitment options	13 brand-specific emblem designs

Illuminated emblem look

A glowing white logo gives the rear of your car a clean factory-lit finish. The dynamic scanning mode adds a moving sweep of light.

Built for the outdoors

The LED lamp is waterproof and dustproof, and backed with strong double-sided adhesive for a firm hold.

Wires to your night lamps

Connect the logo light to the taillight supply so it switches on together with the small night lamps. Tools needed: flat and cross screwdrivers, pliers, electrical tape and a towel.

Customer reviews

What owners say

Rear emblem looks factory
The white glow on the trunk emblem looks like it came from the dealer. Really tidy result.
Max S.
Scanning effect is neat
The sweeping light across the logo is subtle but eye-catching at night.
Ella M.
Fits my Honda perfectly
Ordered the Honda version and the shape matched the original badge exactly.
Max N.
Strong adhesive
Pressed it on and it has not budged through rain and car washes.
Cole A.
Wiring was straightforward
Red to red, black to black at the plate lamp connector. Took me about an hour.
Mason S.
Lights with my night lamps
It comes on together with the small lamps, exactly as hoped.
Ella A.
Great on my Toyota
The glowing emblem looks sharp on a dark paint colour.
Mason E.
Waterproof so far
Drove through heavy rain this week and it kept glowing without a flicker.
Anna E.
Clear instructions
Having the tools list and steps made the swap easy, even for a first timer.
Sophia C.
Crisp white light
Even brightness across the whole badge, no hot spots.
Paul G.
Worth the upgrade
Small change but the car looks so much better at night.
Henry N.
Good fit on my Ford
Sized right for the oval and the finish is clean.
Tess J.
Neighbours noticed
Two people asked where I got it the first evening.
Grace B.
Solid quality
Feels well made and the wire is a good length for the trunk.
Sarah N.
Looks great, took time
Result is excellent, but prying off the old emblem took care with a towel and screwdriver.
Ruth D.
Check your emblem size
Measured twice before ordering and glad I did. Looks good, install needed patience.
Ben P.
Drilling was needed
My car had no hole so I drilled one. Worked out, just plan for it.
Eric N.
Good once installed
Wiring needed a bit of research, but the light itself is nice.
Jack T.
Nice effect, scanning is subtle
Looks good, though I expected the scanning effect to be more obvious.
Anna N.
Fine for the price
It works well. Fitting it behind the trunk panel is fiddly.
Beth J.

Frequently asked questions

Will it fit my car?

Pick your brand from the option list and check the size of your current rear emblem before ordering. Leave a note with your car make, model and the emblem size if you are unsure.

How is it wired?

Run the power line through a logo positioning hole into the trunk and connect red to red and black to black at the licence plate lamp or taillight connector, then wrap the joints with insulation tape.

Do I need to drill?

Only if your car has no existing hole behind the emblem. In that case you drill a hole for the wire.

What colour is the light?

White, in dynamic scanning mode.

What tools do I need?

A flat screwdriver, cross screwdriver, pliers, electrical tape and a towel to protect the paint.

How long does delivery take?

Orders are confirmed and processed within 2–3 business days, then typically arrive within 6–12 business days in the US, UK, Germany and the rest of Europe, or 8–15 business days in Canada (7–14 elsewhere), tracked. Shipping is free on orders of $29.99 or more; below that it is a flat $9.99.

How long does shipping take?

Orders are confirmed and processed within 2–3 business days (Monday to Friday, excluding Chinese public holidays), then typically arrive within 6–12 business days in the US, UK, Germany and the rest of Europe, or 8–15 business days in Canada (7–14 elsewhere), tracked all the way to your door.

Is shipping free?

Yes, on every order of $29.99 or more. Below $29.99, standard shipping is a flat $9.99, shown at checkout before you pay.

What is your return policy?

30-day returns, no questions asked. If it isn't right, contact us and we'll arrange the return.

Is there a warranty?

Every product carries a full 1-year warranty on top of the 30-day money-back promise.

Which payment methods do you accept?

All major cards, PayPal, Apple Pay and Google Pay — processed through Shopify's encrypted, PCI-compliant checkout.

How do I track my order?

You'll get a tracking link by email as soon as your order ships, and you can check progress any time on our Track Order page.